Best viewed using:
Internet Explorer
or
Mozilla Firefox
To achieve the the
greatest degree of realism, many modeling projects desire lighting effects
that go well beyond simple static lighting. Many require effects that are quite dynamic, producing animated behavior to mimic
a wide variety of devices. Below are our products
specifically designed for LEDs that we've developed
to support a wide range of dynamic lighting effects. We hope you find them
innovative.
Due to the
wide variety of modeling scales, LEDs for use with
these products are sold
separately and can be found by clicking on the
Lighting Products link at the left side of this page.
Rotating Beacon Simulators
These module reproduce a highly realistic
simulation of a rotating beacon by sequencing LEDs (sold separately) that are
positioned to produce the effect. See LED Construction in the
More Info tables to the right for complete information. The timing of the
rotational effect closely replicates that of typical rotating beacons used on emergency,
construction, utility
and military vehicles. The N8042A version is configured for white or blue LEDs. The N8042C
is for a red or yellow 4-LED assembly that simulates the "gumball" type
of rotating beacon $12.95
More Info
Which
Sim is best for me?
Connecting N8042
Connecting NLA/D8042
LED
Construction
Video of
effect
Item#
Cart
Price
N8042
NLA8042
$13.95
NLD8042
$13.95
N8042C
$13.95
NLA8042C
$14.95
NLD8042C
$14.95
More Info N8042C
Connecting N8042C
Connecting NLA/D8042C
LED
Construction
$45.95
Navigation Light Simulators for Aircraft These modules generate various different effects to simulate
navigation and running lights including strobes and beacons.
Details of each $14.95 $15.95 $16.95 $16.95
Machine Gun Simulator This simulator generates a rapid stream of pulses alternating
between 2 connected LEDs whenever the input pin is grounded. The timing and
duration of these pulses mimics the appearance of automatic weapons fire
like that of Star Wars® X-wing fighters. The N8060A version of this module is
configured
for 4 LEDs
alternating between pairs to simulate 4 guns firing. $13.95 $13.95
7 LED Arrow Bar for Emergency Vehicles These modules generate various different effects to simulate
traffic control routing guideance.
N8108-02
is configured for modern
Police vehicles
N8108-03 is configured for 1970's era Police
vehicles N8108-04 is configured for Fire vehicles
N8108-05 is configured for 1970's era Utility vehicles Complete details of each Simulator's effects and instructions for connection are
covered in the More info table to the right. $27.95 $27.95 Custom Lighting Effect Simulators
Do you need a special lighting effect that that
no one produces or have a unique prototype requirement? We may be able to
help. The N8050 will support 1 LED output, the N8051, 2 LED outputs, and the
N8052 will support 3 LED outputs. For an additional programming charge
(quoted separately), we will program the appropriate simulator to create
your effect. Just email or call us with your requirements. We will review
them, determine if they are within the capabilities of our simulator, and if
so, respond with our quotation. Delivery can be within 2 weeks and our quote
will be reasonable. $12.95 $13.95 $14.95
Machine Gun Simulator (WW1) $12.95 The Marslight modules (N8031/A) produce a highly realistic Mars effect which is very eye-catching.
Output intensity varies from dim to full-bright through a triple-pulse timed
to imitate side (reflective) shine as well as frontal shine of the oscillating
Mars pattern. The N8031A version of this module is configured
with an additional output for an optional headlight. See Connecting
in More Info to the right. The N8031B Super-Marslight Simulator
provides output for 3 LEDs to create the visual effect of an actual
moving Marslight. See the video of effects
in More Info above. The N8031C version is for a Marslight with red
LED. The NLD8110-03 version is for a simultaneous
dual-Marslight output on a single low-voltage simulator board.
This tiny,
low-voltage/low-current Simulator produces navigation lighting
for many different drone craft. Five 3mm LED lights are provided: 2
white for alternate flashing LEDs for the drone front, 1 red LED for
port mounting, 1 green LED for starboard mounting, both flashing and
a steady-on white LED for rear mounting.
The module is fully
pre-wired with 6" leads for easy installation.
Item#
Cart
Price
NLD8110-02
More Info
Connecting
Video coming soon
More Info
Which
Sim is best for me?
N8062 Details
N8062A/B
Details
NLD8062
Details
NLD8062A/B Details
Video coming soon
Item#
Cart
Price
N8062
N8062A
$15.95
N8062B
$15.95
NLD8062
NLD8062A
NLD8062B
Item#
Cart
Price
N8060
N8060A
More Info
Connecting
Video coming soon
Item#
Cart
Price
N8108-02
N8108-03
$27.95
N8108-04
$27.95
N8108-05
Item#
Cart
Price
N8050
NLA8050
$13.95
NLD8050
$13.95
N8051
NLA8051
$14.95
NLD8051
$14.95
N8052
NLA8052
$15.95
NLD8052
$15.95
More Info
Connecting
Item#
Cart
Price
N8061
N8061A
$13.95
More Info
Which
Sim is best for me?
Connecting
N8031/A/C
Connecting NLA/D8031/A
Connecting
N8031B
Connecting NLA/D8031B
Connecting NLD8110-03
Video of
effects
Item#
Cart
Price
N8031
$12.95
NLA8031
$13.95
NLD8031
$13.95
N8031A
$13.95
NLA8031A
$14.95
NLD8031A
$14.95
N8031B
$14.95
NLA8031B
$15.95
NLD8031B
$15.95
N8031C
$12.95
NLD8110-03
$24.95
Dual Roto-Ray Simulator for 3 pair of series-wired red & blue LEDs
The N8090 simulates
the effect of
two rotating Roto-Ray warning lights by sequencing
6 LEDs
(3 series-wired pairs) connected to its outputs. $13.95
Dual Roto-Ray Simulator for red LEDs
The N8089 simulates
the effect of
two rotating Roto-Ray warning lights by sequencing
6 LEDs
connected to its outputs
$13.95
More Info
Connecting
Item#
Cart
Price
N8090
More Info
Connecting
Item#
Cart
Price
N8089
|
Early-era 8-LED alternating flasher for red and/or yellow LEDs The N8110-16 simulates an early-era (circa 1950's) alternating 8-light lightbar configured for red & yellow LEDs.
|
Unmarked Emergency Vehicle w/alternating headlights & beacon $21.95
Modern Schoolbus flasher w/stop sign flashers $21.95
High-current Smoke Generator Controller & Timer The N8103B
Smoke Generator Controller/Timer is essentially a very high current
switching circuit combined with one of our N8050 single output Simulators
programmed as a timing circuit. The timer is mounted on the Current Control main board. The heart of the Current control board is a N-Channel
HEXFET Power MOSFET that can act as a power switch to easily control up to
16 Amps of 12-volts DC. Note: Actual power
switched is based on power supply (not included) that is connected to the
N8103B.
Dual Sequential MarsLights w/ Roto-Ray emergency flasher The N8LD110-04/05 simulates two Mars light
simulations with staggered start times for random appearance.
One for a white LED and the other for a red LED. Also included
are outputs for a 3-LED Roto-ray rotating emergency flasher.
The -04 is configured for a modern 360RPM
Roto-ray , and the -05 is configured for
an earlier-era 120RPM Roto-ray flasher. The
NLD
versions are for 3.3-volt operation
More Info
Connecting
Item#
Cart
Price
N8110-11
More Info
Connecting
Item#
Cart
Price
N8110-07
More Info
Using &
connecting
Item#
Cart
Price
N8103B
$31.75
More Info
Connecting
Item#
Cart
Price
NLD8110-04
$21.95
NLD8110-05
$21.95
|
As with the N8103 Booster Boards above, these Super Boosters come in 3 flavors: N8103A-1 to support a single output Simulator, N8103A-2 for 2 output Simulators, and N8103A-3 for 3-output Simulators. A Simulator is easily be piggybacked on a Booster Board (connecting wire included) and share a common power input for both. However, there are many modeling situations where a particular lighting effect may be desirable if it can be reproduced on many LEDs (series or parallel groups) or LEDs that exceed the 25mA or 5-volts DC. This is where our Booster Boards shine (forgive the pun). At just 0.8" x 1.50", these small boards increase a simulator's output up to times a Simulator's output and a DC voltage range of 9-18 VDC. This greatly expands the versatility of many of our Simulator products, especially where LEDs can be wired in series groups!
Our Simulator boards can also be programmed to perform as timer modules to
turn on and off outputs in timing ranges from seconds (or even
milli-seconds) to hours. When coupled with these Super Boosters a vary wide
range of control and automation can be performed.
Standard voltage operating range for the Super Booster Board is 6 to 18 volts DC. This voltage range is determined by the on-board voltage regulator mounted on our Simulator boards The Boosters come in 3 flavors: N8103-1 to support a single output Simulator (i.e., N8032 Beacon), N8103-2 for 2 output Simulators (i.e., N8038 Early-era Alternating Flasher), and N8103-3 for 3-output Simulators (i.e., N8043 Universal Strobe). A Simulator is easily be piggybacked on a Booster Board (connecting wire included) and share a common power input for both. This is the big brother of our Simulator Booster Boards. It is exactly the same size (0.8" x 1.50") as our N8103 product above, but has a much larger final-stage power transistor for the output. This allows a much wider range of control of many of our newer products like multiple sound modules or much larger groups of LEDs. It also allows driving much higher current LEDs for special lighting situations.
The tiny size of our Miniature Simulator modules above make them
extremely versatile for all modeling scales. However, this size also limits
output driving capability to 25mA at 5-volts DC per output channel. This is
sufficient to support a very wide range of lighting effects.
Super Boosters Simulator Boosters 
High current output boost plus added control solder points Supports up to 18VDC per output channel
 |