Best viewed using:
Internet Explorer
or
Mozilla Firefox
The Drake Street Shop Track is the newest HO Diamond Series craftsman kit to be released by Rail Scale Miniatures of Canada. This highly detailed limited-series kit is perfect for different siding placements on many layouts and dioramas.
As with previous kit by RMS, Ngineering is honored to provide lighting kit for this new product. We offer both pre-wired LEDs and un-wired LED kits, and versions with & without our Gooseneck Bending Tool. Details are listed below.
Larger pictures of the assembled Drake Street Shop Track Kit can be seen here
NK033 includes all parts necessary to build the lighting kit.
An itemized list of parts included in this kit are as follows:
| Item# | Description | Qty. |
| N2018-2 | 0.018" Stainless Steel Tubing 4-pack | 1 |
| N7005-8 | HO 18" Lampshade 8-pack | 1 |
| N7006-8 | HO Escutcheon 8-pack | 1 |
| N1018-2 | Micro Incandescent LED 2-pack | 3 |
| N5038 | #38 Magnet wire 100ft. each red & green | 1 |
| N8105 | LED Distribution Board Jr. | 1 |
| N3518 | 10V .825 Amp Switching Power Supply | 1 |
| N8021 | Intelligent LED tester | 1 |
| N4200 | Low-temperature Silver Solder | 1 |
| NT301 | LED/wire Holding Tool | 1 |
| PA1002 | 10K-ohm 1/8-watt SMD Resistor | 3 |
| PA2102 | 21K-ohm 1/8-watt SMD Resistor | 3 |
| PA1501 | 1.5K-ohm 1/8-watt SMD Resistor | 3 |
This lighting kit is priced with a 33% savings over standard retail pricing for the same parts if purchased separately. A few extra parts are included for an additional gooseneck light if desired.
NK033BT includes all of the above plus our NT302 HO Gooseneck Bending Tool (also at a 33% savings).
NK034 includes all 5 LEDs pre-wired with lead lengths cut to 12 inch length for proper installation.
An itemized list of parts included in this kit are as follows:
| Item# | Description | Qty. |
| N2018-2 | 0.018" Stainless Steel Tubing 4-pack | 1 |
| N7005-8 | HO 18" Lampshade 8-pack | 1 |
| N7006-8 | HO Escutcheon 8-pack | 1 |
| P1018-BW12 | Micro Incandescent LED back-wired w/12"leads | 5 |
| N8105 | LED Distribution Board Jr. | 1 |
| N3518 | 10V .825 Amp Switching Power Supply | 1 |
| N8021 | Intelligent LED tester | 1 |
| N4200 | Low-temperature Silver Solder | 1 |
| PA1002 | 10K-ohm 1/8-watt SMD Resistor | 3 |
| PA2102 | 21K-ohm 1/8-watt SMD Resistor | 3 |
| PA1501 | 1.5K-ohm 1/8-watt SMD Resistor | 3 |
Note: For NK034 & NK034BT, please allow 1-2 weeks for delivery. Prewired LEDs are wired and tested on an individual basis and require extra time for processing.
This lighting kit is priced with a 33% savings over standard retail pricing for the same parts if purchased separately. A few extra parts are included.
NK034BT includes all of the above plus our NT302 HO Gooseneck Bending Tool (also at a 33% savings).
Instructions for fabrication and placement of all of the lights mentioned above kits are included with the Drake Street Shop Track model kit.
© 2022 Ngineering